ET Bird Control 2000 Information

When you have bird problems in two different locations it is best cover both areas. Below we have given an example of a bird problem on the front of the home as well as the left side of the home.

We find that the best location that gets the most effectiveness is mounting the ET Bird Control 2000 right within the infestation / area of the birds.
It is also recommended that you experiment with various locations to find the most affective location to install your ET Bird Control 2000.

Installation of ET Bird Control 2000

You can mount the ET Bird Control 2000 just about any where you can put a wood screw or metal screw in. We find it is best to get the ET Bird Control 2000 closest to the bird problem as possible. The closer to the Bird Problem the more Powerful the results.

Step (1) Locate the problem area. This area the birds are hanging out on a window ledge.				Step (2) Mount a common wood or metal screw and leave about a 1/4 inch of the head sticking out.

Step (3) Easily mount the ET Bird Control 2000 shell onto the wood screw. (it simply slides on to screw)				Picture of mounted Shell/Holder


Step (4) Switch the ET Bird Control 2000 On.				Step (5) Insert ET Bird Control 2000 into shell. *Pic 1*

	Insert ET Bird Control 2000 into shell. *Pic 2*


	Finished Result!
		Now in some case you might find yourself needing to change the location of the ET Bird Control 2000 as the birds might not be triggering the PIR System (system turning its self on).

Custom Search

59.00 a Unit